Name: Güde Alpha peeling knife, 1701/09
Brand: Güde
SKU: GU1701-09
Price: 68 EUR
Availability: InStock

Civivi Click CA-01A Grey Carabiner

notforsale

not_replaced_in

msrp_price

Fällkniven CBNC sharpening stone, cubic boron nitride

CRKT Pryma 9011 pry bar tool, Jesper Voxnaes design

Skerper Professional sharpening set 220/1000/2000/5000, dressing stone + holder

productlabel

Eden Magnetic Knife Block EQB100 walnut wood

Eden Magnetic Knife Block EQB103 bamboo

Eden Magnetic Knife Block EQB101 acacia wood

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Eden cutting board P012 bamboo, 45 x 30 cm

Güde Alpha peeling knife, 1708/08

legal_agecheck_key

Güde Alpha Bird's beak turning knife, 1703/06

Eden cutting board P011 acacia wood, 40 x 25 cm

Eden Pankiri Japanese bread knife 27 cm

Eden Essentials kitchen scissors

Eden 16x3 cm knife guard

Blade length: 9.5 cm 
Overall length: 19.6 cm 
Weight: 65 grams


Peeling knife from the Alpha series of Güde.  
   


The kitchen knives from the Alpha series of Güde are ice hardened and in German tradition made of chrome-vanadium-molybdenum steel. This steel is hardened to a hardness of about 56 HRC. According to Güde, through this process you reach an optimal combination of hardness, sharpness preservation, sharpening possitibilities and resistance to chipping (breaking off pieces of steel). The forged knives are, for a great extent, hand made and sharpened.  
  


The handles are made of highly durable Hostaform. Thanks to this Hostaform (similar to POM) the knives of the Alpha series can be cleaned in the dishwasher now. Still we advise not to do this, as the inevitable clashing inside the dishwasher may have consequences for the edge. The handle is riveted with three rivets between the unique double bolster of each knife. This double bolster gives the knife the balance which is needed to use it for a comfortably for a long time. An unmissable feature of Güde kitchen knives.

Güde Alpha peeling knife, 1701/09

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Güde Alpha peeling knife, 1701/09

Güde Alpha peeling knife, 1701/09

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Güde Alpha peeling knife, 1701/09

Güde Alpha peeling knife, 1701/09

Güde Alpha peeling knife, 1701/09

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Güde Alpha peeling knife, 1701/09

Relevant topics