The Fenix HM61R head torch is perfect for industrial use. With both a red and a white light you have a very practical light in hands. The red light is perfect to maintain your night vision, but also as a warning signal that you are working in that spot. With the white light you have a clear neutral beam with which you can light up a broad light image. The elastic headband ensures that you can carry the light on your light or helmet. Combined with up to 1200 lumens this head torch is perfect for professional purposes.
Do you prefer to keep your hands free, but do not want to put the light on your head? The light is secured with a rubber strap. As soon as you remove this strap you can easily remove the light. The back of the light contains a built-in magnet, click it onto metal and your hands will be free! If there is no metal around you can also easily carry it in your chest pocket.
How to use the Fenix HM61R
The head torch is enhanced with a holder that allows the light to turn 180 degrees. As such you can easily determine the right angle. Via a silicone button you can easily control the Fenix HM61R. This switch was designed as such to make sure you can also easily use it while wearing gloves. You activate the white light by pressing the switch approx. 1 second. If you want to activate the red light you need to press the switch approx. 2 seconds. To switch between the different light modes you click the switch shortly.
White light modes on the Fenix HM61R
- Turbo: 1200 lumens, burn time of approx. 2 hours*
- High: 400 lumens, burn time of approx. 4 hours
- Medium: 150 lumens, burn time of approx. 12 hours
- Low: 50 lumens, burn time of approx. 38 hours
- Eco: 5 lumens, burn time of approx. 300 hours
Red light modes on the Fenix HM61R
- Medium: 5 lumens, burn time of approx. 80 hours
- Low: 1 lumen, burn time of approx. 400 hours
- Flash: 5 lumens, burn time of approx. 160 hours
You don't want the light to accidentally turn on during transport. To ensure it doesn't you can use the lock-out mode. To activate this mode the head torch needs to be turned on. Click the switch twice in a row. The light will confirm the mode by blinking twice. Now the flashlight will never burn if you don't want it to. To deactivate this mode you click the switch twice again. The light will immediately start in the lowest light mode.
*The burn time of the highest mode is calculated at the moment the lamp is switched on in the highest position. After 2-3 minutes, the lamp automatically switches to the lower light mode due to temperature regulation.
Charging the Fenix HM61R
You can easily charge the Fenix E61R with the magnetic charging cable. Because the cable does not go into the light this charging option has a longer lifespan than the other lights. The Fenix HM61R comes with a 18650 Li-Ion battery but can also be used with two CR123A batteries.
Want to know how full the battery is? As soon as the light is off click the switch once and the battery indicator will immediately give you the current battery voltage. As such you can quickly see what the voltage is.
- Constant green: 100% - 85%
- Flashing green: 85% - 50% power
- Constant red: 50% - 25% power
- Flashing red: 25% - 1% power
Accessories for the Fenix HM61R
The Fenix Hm61R comes with one Fenix 18650, 3500mAh Li-Ion battery, magnetic charging cable, headband, lamp holder and a spare O-ring.
Do you want to safely store the head torch? Order the Fenix APB-20 storage bag. As such you will enjoy your head torch even longer.
If you use the turbo mode for a longer period of time the light will start to heat up. When the light reaches a temperature of 65 degrees Celsius or higher, the light will automatically drop the amount of lumen to lower the temperature. As soon as the temperature drops the light will switch back to the turbo mode.